Warping Automobile Disk Brake Rotors Are Preventable

In the aircraft and aerospace industry, the standards required for various components, parts, and specifications are considerably higher. Everything built for the aircraft and aerospace industry is light and strong. It is the “AND” part of that sentence that makes the parts expensive, not the “light” part. Automobile manufacturers today who build high-performance and sophisticated vehicles understand the “light” part, but not necessarily the “strong” part. But what they do understand is how much force can be applied to these parts before they succumb to failure.

Today’s brake rotors (or disk brake system) are built very light with advances in technology such as slotting, cross-drilling, cryo-treating and many other advances to allow the brakes to breathe better and last longer. However despite all this technology that goes into the rotors, they are still not strong enough to withstand a mechanic’s error. How often have you had a car pulsate when applying the brakes? The reason this happens is because the lug nuts on your wheels were not torqued down to specifications set out by the manufacturer. Every mechanic shop you walk into, you can always hear the distinctive sound of the air wrench being used to loosen and tighten parts and lug nuts. These air tools are capable of putting out an immense amount of torque, but that is where the problem starts. The torque setting on these air wrenches are preset to a single setting (usually the strongest), never changed, but used to tighten down everything on your car. BAD!

Today’s modern vehicles are built almost like airplanes and have very acute specifications that must be followed. The most commonly made mistake by mechanics and car owners are to over-tighten the lug nuts on the wheels of their cars. Some even go as far as jumping on the tire wrench to ensure that the lug nuts are “tight” and that the wheels will not “fall off” while driving. However, over tightening your lugs will lead to premature failure of your brake rotors as seen by warping or deformations in the rotor. It may also lead to wheel bolts “snapping” when over-tightening the wheels stretches and weakens the bolt.

It is therefore important to ensure that your lug nuts are tightened to the appropriate specifications and to do that, there are several things you can do. For most vehicles, the lug nuts need to be tightened down to 70-100 ft-lbs using a good quality torque wrench. However, you do not need a torque wrench to tighten your lug nuts correctly.

The approach I have always taken is to tighten the nuts as tightly as can be done with your fingers first. Then taking a tire wrench, tighten the nut without apply much effort until you feel some resistance. Then simply (without jumping on the tire wrench), put your body weight on the wrench until it stops turning. You do not need to jerk your body to ensure that there is more room to tighten. In general, if you follow this practice, you will put about 80-90 ft-lbs of torque onto the lug. Do this consistently for all your wheels to ensure that your brake rotors have maximum life. However, for best results, I still recommend acquiring a quality 1/2″ drive torque wrench, my favorite being the Neiko Pro line that I use religiously for every mechanical work conceivable.

It is a worthwhile investment and they typically range in price from $20-40, which is cheaper than a single brake rotor for your car. The brakes and wheels are the most important components of your car and therefore, requires the most care and attention. Go check your lug nuts today.

Image Optimization for SEO – Best Practices

Quality content is the key to SEO success. Content doesn’t just mean your text contents. Images must be an integral part of your content strategy. At times, single images can be far more effective than your 1000 word blog post. It also helps you improve blog post quality and performance.

Images, Infographics, Videos and all other multimedia contents on your web page will help you in increasing the user engagement on your site and makes the visitors stay on your site for longer duration which helps in reducing the bounce rate.

Not just adding images to your contents, you should also optimize those images for better SEO performance. Optimization of images must be the one important aspect of your on-page SEO process.

If you are using images in your content, there are many aspects to be considered related to SEO.

Relevancy

Using images doesn’t mean that you should fill up your content with loads of pictures. You should use it only when it is required and also you should use images that are more relevant to your content.

Placement of your images is an another important aspect. It should be placed at a relevant location in your content according to your text content.

Use original images

Originality always helps in improving your user experience and your authority. Usage of original images will be helpful in improving your SEO performance. You can create original images with a graphic designer or you can take your own photographs with a quality camera. It is the reason top White hat SEO companies employ talented graphic designers for creating quality images.

If you are not able to employ an in-house graphic designer or if you are running out of time, you can always use high quality images from the web. But the important factor to be considered is it should be copyright free.

There are many tools available for getting copyright free images without any cost. The most popular ones are Unsplash, Flicker, Freeimages.

Image Size

Images are the main source for damping your site’s speed. And site speed is a crucial factor in your SEO performance. So, you should be extra cautious in using images without compromising your page speed.

It should not also affect your image quality, you should have a correct balance between. You can achieve this by reducing the file size by compression. You can use tools like Photoshop for compression.

File name

Search engine crawlers are visually impaired, it can even interrupt a 5000 word text content, but it cannot interrupt a single image and what the image is about. It is the reason using a keyword rich file names for your images is an important aspect in image optimization.

Google bots and other search engine crawlers can read your image’s file name and if it is named with your target keyword, it gives a signal to search engines about the image topic and thus helps your SEO performance.

For example, if your image is related to selling sports shoes, rather than using the file name as “IMG_89868″ you can use it as “Black_Tennis_Shoes”.

Alt text

Similar to the file name, search engines can read Alt text of the images. Alt text is known as “Aleternative Text”, is an HTML attribute used to describe the content of images.

You should use Alt text which is relevant to your images and it should be clear and descriptive. You can use your target keywords in the Alt text but be cautious about Keyword stuffing.

If you are not focusing on Image optimization, you are missing a huge opportunity in improving your SEO performance. You can use above mentioned best practices in your on-page optimization process.

What Software Should I Use to Create My CD or DVD Artwork?

After recording your album, having it mastered and pressed, you head over to your disc duplication facility’s website to place your order. Reading up on the ordering process you notice that you have the option to have artwork printed on the disc face, and can also have tray card and insert artwork printed. This is a great idea, as it allows you to give your project a more professional look and feel. You can either hire a print designer, who will hopefully already know all of the proceeding information. Or you can have a go at it yourself, utilizing one of the many different graphics creation programs available. If you are choosing to create your own artwork, read on.

There are many different programs out there that can be used to create print artwork. One of the more popular programs is Adobe Illustrator. Adobe Illustrator is a vector based drawing program, available for both PC and Macintosh computers. You could also use, CorelDRAW, Paint Shop Pro, or even Adobe Photoshop. I will go into a little bit more detail about what the differences are between some of these programs later on in this article, and why some of them are better suited for print design. Here is a list of 3 terms you should be familiar with before starting your artwork project.

1. Raster Graphics

Raster graphics are also known as bitmap graphics. This form of graphics image is a data file or structure representing a generally rectangular grid of pixels, or blocks of color, on a computer monitor, or other display device. Think of a raster images as a checkers board, with each square (pixel) on the board displaying a different color. This collection of colored dots (pixels), in turn form the full picture. The quality of a raster image is determined by the total number of pixels (resolution), and the amount of information in each pixel. Raster graphics are practical for photographs and photo-realistic images because of the way that they display images. Pretty much all photos you will find on the internet, and all photos you take with your digital camera will be raster images. You may want to use photographs for your CD or DVD’s artwork, but you must mind a few certain things:

A. DPI –
I will go into this a bit further in the “DPI” section of this article. In a nutshell, any photograph that you would like to use for print must be 300 DPI (dots per inch) or higher. DPI refers to the density of pixel information in a photograph.

B. Color Mode –
There are two basic modes of color: RGB and CMYK. All you need to know really is that all print artwork must be created as a CMYK document, as this refers to the colors of ink that a printer uses to recreate your artwork. If you create your artwork as an RGB document, the printed document will most likely shift in color. For more info on this, please refer to my last article. What do you need to start a CD duplication project?

2. Vector Graphics

Also known as geometric modeling, this form of graphic uses geometrical primitives such as points, curves, and lines to represent images. Instead of displaying blocks of color to represent a photo vector images rely on set points to determine the outline of an object, using mathematical formulas to determine the curve of the lines between said set points. Vector graphics are ideal for simple or composite drawings that do not need to achieve photo-realism. I suggest that you used vector objects for all of your artwork’s areas that are not photos.

3. DPI

Dots per inch, (DPI) is the number of individual dots of ink a printer can produce within a one-inch space. This translates as, the higher the DPI, the sharper the image. Although, most commercial printers will tell you that anything over 300DPI would be considered “print-quality”. I recommend that you make sure that your artwork is at least 300DPI, with 600DPI being the optimal setting for your artwork.

After all this technical mumbo-jumbo, you’re probably scratching your head, still unsure of what program to use to create your artwork. The truth is you can use pretty much any graphics program to create your artwork, providing that you correctly set the DPI and color mode of your document. Personally, I usually use a combination of Adobe Photoshop & Illustrator to do all of my print artwork. I edit all bitmap images in Photoshop and create all of my vector content in Illustrator, combining the two in Illustrator. My advice is now that you have the basic background knowledge, experiment to figure out what works best for you!

Work at Home Typing – How to Evaluate the Best Programs

The internet is creating flexible and lucrative opportunities enabling average people to earn the kind of money that can supplement or even replace their full time income. One of the most popular income generating programs is work at home typing.

Advantages of Work at Home Typing

Work at home typing has many advantages. You can work when you want because there are no set hours. You can work where you want, at home or anywhere there is an internet connection. With the high cost of fuel these days this is a great advantage for those who feel the pinch at the pump. The traditional concept of “going to your job” is gone! A walk to the coffee shop, beach or park for example can be your workplace as long as you have a wireless internet connection, and a laptop computer.

How Work at Home Typing Programs Work

The way work at home typing programs work is simple. You sign up with a typing program online and receive an extensive list of companies that are in need of data entry work. These companies will send typing assignments to your email address; you complete the assignment and submit it back to the company. You are paid per assignment. It’s pretty straightforward.

Actual Work Description

The actual work done with these work at home typing programs is simple, usually consisting of typing 3-5 lines into a pre-formatted input form. You will be constructing what is called pay per click ads for which there is currently tremendous demand; so much that online companies can’t hire enough people to meet daily demand. You needn’t be creative or a good typist, as the ads are pre-composed; you merely fill in the blanks.

Income potential is unlimited and depends on how aggressively you pursue assignments.

Evaluating a Work at Home Typing Program

There are guidelines you should follow when choosing an online work at home typing program.

1.) In business for at least 1 year

2.) Well organized, easy to navigate directories

3.) Directories updated at least weekly

4.) Helpful resources available for newcomers

5.) No “waiting period”. Eligible immediately

6.) Customer service available via phone or email

7.) 100% guaranteed.

Make sure you evaluate the company based on these criteria when deciding whom to sign up with. You don’t want to waste your time with companies with out-dated databases, poor member support or hard to navigate member areas within the specific programs website. If the work at home typing program meets these requirements above you should be ok, and after you sign up expect to get started working soon.